Duties and responsibilities; fusion welding process, thermal cutting process; welding and cutting equipment; weld defects and methods of avoiding defects; ferrous and non ferrous metals; metallurgy and weldability of steels; heat treatment, visual inspection methods; destructive and non-destructive testing, etc. Weld Inspector Level 2 : Contents: Training & Certification, The following are some of the training contents regards to Weld Inspector.
The content of the training course on Welding Inspection (Level 2) would consist of the following:-
- Responsibilities & Duties of Welding inspectors
- Welding Terminology and Symbols
- A brief explanation of all type of welding processes and equipment including procedures & test
- Thermal cutting processes
- Material inspections and steel weld metallurgy
- Weldability of steel, stress and distortion
- Post heat treatment, normalizing, quenching and etc.
- Visual examination and dimensional assessment
- Mechanical testing of welded joints
- Understanding of cracking, weld defects and repairs
- Weld decay in austenitic stainless steel
- Welding consumables
- Welding plant and arc welding safety
- Welding related specifications and standards
- Weld drawings, understanding and interpretation
- Weld defects related to welding process and prevention
- Practical : Visual Welding inspection, NDT reporting assessment according to codes/specifications and reporting
- Quality assurance
– QA/QC and inspection
- Normative documents (codes)
Training Day: 5 days + 2 days self study
The content of the training course on Welding Inspection (Level 1) would consist of the following:-
- Basic Duties of Welding Inspector
- Welding process, Position, Consumable, etc
- Joint Types
- Mechanical Test
- Appreciation To NDT
- Course Work
- Interpret Standards
- Visual Inspection - Fillet, Plate & Weld Fit-Up
- Reporting Techniques
Training Day: 3 days
At the end of the course, attendees shall be able to:
- Understand the requirements of relevant codes, standards and specifications
- Possess an understand of the relationship between quality assurance, welding and inspection procedures
- Confirm that welding operators and welders have been properly qualified
- Confirm during welding that only specified and accepted welding procedures are used
- Examine and evaluate welds according to the prescribed inspection procedures
- Review NDT reports on welding work
- Record welding inspection results
- Implement a system of quality control over the welding and inspection process
- Posses an understanding of the factors influencing the formation of weld defects
- Interpret weld drawings and specifications
- Compile and maintain detailed weld inspection records
- Meets syllabus requirements for PCN examinations
Time Table Of Course (Level 2):
Day 1 to Day 3
- Duties of Welding Inspector
- Welding Process,Position,Consumables etc
- Joint Type
- Mechanical Test
- Course work
Day 4 - Day 5
- Interprete Standards
- Visual Inspection ( Macro,Fracture,Bend Test,Plate and Pipe )
- Reporting Technique
+ 2 days of Self Study
Time Table Of Course (Level 1):
Day 1 to Day 2
- Duties of Welding Inspector
- Welding Processes, Positions, Consumables & etc.
- Joint Types
- Mechanical Test
- Course work
Day 3 - Day 4
- Interpret Standards
- Visual Inspection (Weld Fit-Up, Plate and Fillet)
- Reporting Techniques
*All Fees are subjected to 8% SST
| 5th January - 9th January 2026 |
| 12th January - 16th January 2026 |
| 19th January - 23rd January 2026 |
| 26th January - 30th January 2026 |
| 9th February - 13th February 2026 |
| 23rd February - 27th February 2026 |
| 2nd March - 6th March 2026 |
| 9th March - 13th March 2026 |
| 30th March - 3rd April 2026 |
| 6th April - 10th April 2026 |
| 13th April - 17th April 2026 |
| 20th April - 24th April 2026 |
| 4th May - 8th May 2026 |
| 11th May - 15th May 2026 |
| 18th May - 22nd May 2026 |
| 8th June - 12th June 2026 |
| 22nd June - 26th June 2026 |
| 29th June - 3rd July 2026 |
| 6th July - 10th July 2026 |
| 13th July - 17th July 2026 |
| 20th July - 24th July 2026 |
| 27th July - 31st July 2026 |
| 3rd August - 7th August 2026 |
| 10th August - 14th August 2026 |
| 17th August - 21st August 2026 |
| 7th September - 11th September 2026 |
| 21st September - 25th September 2026 |
| 28th September - 2nd October 2026 |
| 5th October - 9th October 2026 |
| 12th October - 16th October 2026 |
| 19th October - 23rd October 2026 |
| 26th October - 30th October 2026 |
| 2nd November - 6th November 2026 |
| 16th November - 20th November 2026 |
| 23rd November - 27th November 2026 |
| 30th November - 4th December 2026 |
| 7th December - 11th December 2026 |
| 14th December - 18th December 2026 |
* Training dates may be postponed or cancelled without prior notice unless we have confirmed your slot.
No.18, Jalan Tanjung SD13/2,
Bandar Sri Damansara,
52200 Kuala Lumpur,
Malaysia
Mondays to Fridays
9.00am - 5.30pm
Saturdays, Sundays and Public Holidays
Closed
E-mail info@mindt.com.my
Note: Please add our email info@mindt.com.my to your address book to avoid our email going to your spam folder.
TELEPHONE +603 6280 3448
MOBILE +6011 6518 0600